{"product_id":"i̇zotup-600-enjeksiyon-poliuretan-kiti","title":"Isotope 600-E Injection Kit (1m³)","description":"\u003ch2 data-path-to-node=\"2\"\u003eİzotüp 600-E Injection Polyurethane Kit (1\u003cb\u003em³\u003c\/b\u003e)\u003c\/h2\u003e\n\u003cp data-path-to-node=\"3\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"3\"\u003eProfessional insulation and structural support for large volume cavities.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"3\"\u003eİzotüp 600-E is a portable and high-performance injection system for large-scale insulation projects.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"4,0,0\"\u003eFilling Capacity:\u003c\/b\u003e A single kit has the power to fill a full \u003cb data-index-in-node=\"38\" data-path-to-node=\"4,0,0\"\u003e1 \u003cb\u003em³\u003c\/b\u003e\u003c\/b\u003e volume.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"4,1,0\"\u003eAreas of Use:\u003c\/b\u003e Industrial tank insulation, large ship\/boat compartments, double-walled prefabricated walls, sub-foundation void filling, and large-scale insulation panels.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"4,2,0\"\u003eHigh Insulation:\u003c\/b\u003e Provides industrial standard thermal protection and sealing with an R-6.2 value.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"4,3,0\"\u003eAdvantage:\u003c\/b\u003e Requires no heavy machinery or electrical connections. Provides ease of mobile use on-site; performs professional filling with a plug-and-play system.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003chr data-path-to-node=\"5\"\u003e\n\u003ch3 data-path-to-node=\"6\"\u003eApplication Instructions\u003c\/h3\u003e\n\u003ch4 data-path-to-node=\"7\"\u003e1. Gun and Nozzle Preparation\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,0,0\"\u003eUse of Petroleum Jelly:\u003c\/b\u003e Before attaching the nozzle, apply a thin layer of \u003cb data-index-in-node=\"78\" data-path-to-node=\"8,0,0\"\u003epetroleum jelly\u003c\/b\u003e to the tip of the gun. This prevents hardened foam from damaging the gun and makes cleaning easier.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,1,0\"\u003eFull Locking:\u003c\/b\u003e When attaching the nozzle to the gun, ensure it is \u003cb data-index-in-node=\"41\" data-path-to-node=\"8,1,0\"\u003efully seated and locked\u003c\/b\u003e. If the nozzle is not fully seated, the material may back up into the gun, rendering the equipment unusable.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4 data-path-to-node=\"9\"\u003e2. Initial Start-Up (Test Spray)\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eBefore proceeding with the injection, perform a small \u003cb data-index-in-node=\"90\" data-path-to-node=\"10,0,0\"\u003etest spray\u003c\/b\u003e into the product box or an empty waste container.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"10,1,0\"\u003eWhy?\u003c\/b\u003e You must check that the two components (A and B) are flowing evenly from the hoses and mixing correctly in the nozzle. You are ready for injection when you see that the color and consistency are stable.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4 data-path-to-node=\"11\"\u003e3. Application and Filling Technique\u003c\/h4\u003e\n\u003cp data-path-to-node=\"12\"\u003ePolyurethane injection application prevents voids by pushing the air inside outwards as the material progresses.\u003c\/p\u003e\n\u003cp data-path-to-node=\"13\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"13\"\u003eDetermining Hole Spacing\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"14,0,0\"\u003eHorizontal and Vertical Spacing:\u003c\/b\u003e Drill holes on the surface you will be applying to (wall, tank, boat hull...) at intervals of \u003cb data-index-in-node=\"98\" data-path-to-node=\"14,0,0\"\u003e30 cm to 50 cm\u003c\/b\u003e.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"14,1,0\"\u003eHole Diameter:\u003c\/b\u003e Use a drill bit of appropriate diameter (usually 10-12 mm) to ensure the nozzle tip fits snugly and creates a seal.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"14,2,0\"\u003eAir Vent:\u003c\/b\u003e Always leave a \"vent hole\" at the highest point. This allows air to escape as the material rises.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"15\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"15\"\u003eApplication Order (Bottom-Up Method)\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"16,0,0\"\u003eStart from the Lowest Point:\u003c\/b\u003e Due to the principles of gravity and expansion, always start the injection from the lowest or outermost hole.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"16,1,0\"\u003eObservation and Transition:\u003c\/b\u003e When the polyurethane foam begins to overflow from the hole above or next to it in a \u003cb data-index-in-node=\"71\" data-path-to-node=\"16,1,0\"\u003e\"creamy consistency\"\u003c\/b\u003e, that area is filled.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"16,2,0\"\u003eSealing:\u003c\/b\u003e Temporarily close the overflowing hole with a plug or your finger (using a glove) for a short time, and immediately move to the next hole to continue injecting.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"16,3,0\"\u003eBreak Time:\u003c\/b\u003e Do not pause the process for \u003cb data-index-in-node=\"20\" data-path-to-node=\"16,3,0\"\u003emore than 30 seconds\u003c\/b\u003e. If there is a pause, the material inside the nozzle will harden; in this case, a new nozzle must be attached.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"16,4,0\"\u003eContinuous Progress:\u003c\/b\u003e Repeat this process until material emerges from the top vent hole.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"İzotüp","offers":[{"title":"Default Title","offer_id":45457505321017,"sku":null,"price":21000.0,"currency_code":"TRY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0772\/0727\/3529\/files\/izotup_600_Kit.webp?v=1772026312","url":"https:\/\/www.izotup.com\/en\/products\/i%cc%87zotup-600-enjeksiyon-poliuretan-kiti","provider":"İzotüp","version":"1.0","type":"link"}